Weld-On Lifting Rings

 

Double and Single Base Weld-On Lifting Rings

  • For asymmetric loads remember that the capacity has to be reduced as shown in the reference table
  • The bracket must always be aligned to the polling direction (tolerance allowed +/- 10°
  • The anchorage clamp can be used safely up to maximum of 20.000 lifts with a full load
  • Safety coefficient 4
  • Ring tested 100% magnaflux
  • Made in high resistant steel
  • Painted with epoxy paint
  • Tested at 20.000 stress cycles
  • In particular applications the capacity which has to be used must be determined by the pulling inclination