Weld-On Bucket Hooks
Weld-On Bucket Hooks
Safety factor 4
-For asymmetric loads remember that the capacity has to be reduced as shown in the reference table
-The hook must always be aligned to the pull direction
-The hook can be used safely up to a maximum 20,000 liftings with a full load
-Made in high tensile steel
-Painted with epoxy paint
-100% magnaflux tested
-Tested at 20,000 fatigue cycles
-Designed, tested and certified in compliance iwth technical norms GS-OA 15-04 - EN 1677
-Suitable for safe lifting in compliance with the machinery directive 2006/42/EC
| Part # | WLL metric tons | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | G (in) | H (in) | Weight (lbs) |
| C832X015 | 1.5 | 0.98 | 3.11 | 1.1 | 1.57 | 0.59 | 1.58 | 0.39 | 4.61 | 1.54 |
| C832X025 | 2.5 | 1.18 | 3.98 | 1.38 | 1.85 | 0.83 | 1.97 | 0.39 | 5.79 | 3.09 |
| C832X040 | 4 | 1.46 | 4.96 | 1.69 | 2.48 | 1.02 | 2.36 | 0.59 | 6.73 | 5.95 |
| C832X067 | 6.7 | 1.89 | 6.22 | 2.13 | 2.8 | 1.3 | 2.76 | 0.59 | 8.19 | 10.58 |
