Single Base Weld-On Lifting Rings
Single Base Weld-On Lifting Rings
- Safety Factor: 4
- Capacity reduction required for asymmetric loads (see reference table).
- Bracket must align with pulling direction (tolerance: +/- 10°).
- Rated for 20,000 full-load lifts.
- Constructed from high-strength steel with epoxy paint finish.
- 100% magnaflux tested and stress-tested for 20,000 cycles.
- Capacity depends on pulling angle in specific applications.
| WLL metric tons | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | G (in) | H (in) | Weight (lbs) | |
| C830X015M | 1.5 | 0.55 | 2.56 | 1.5 | 0.98 | 2.6 | 0.63 | 1.22 | 3.11 | 0.86 |
| C830X025M | 2.5 | 0.63 | 2.95 | 1.77 | 1.06 | 3.03 | 0.71 | 1.36 | 3.58 | 1.3 |
| C830X040M | 4 | 0.71 | 3.31 | 2.01 | 1.26 | 3.43 | 0.79 | 1.57 | 4.02 | 1.92 |
| C830X067M | 6.7 | 0.98 | 4.61 | 2.65 | 1.73 | 4.53 | 1.02 | 2.3 | 5.55 | 4.92 |
| C830X010M | 10 | 1.22 | 4.96 | 2.64 | 2.17 | 5.08 | 1.12 | 2.78 | 6.18 | 7.34 |
| C830X016M | 16 | 1.77 | 6.85 | 3.94 | 2.72 | 7.48 | 1.65 | 3.43 | 8.62 | 20.46 |
