Double Base Weld-On Lifting Rings
Double Base Weld-On Lifting Rings
- Ring to be welded for load lifting.
- The entire perimeter of the base must be welded except for the water discharge area
- For asymmetric loads remember that the capacity has to be reduced as shown in the reference table
- The bracket must always be aligned to the polling direction (tolerance allowed +/- 10°)
- The anchorage clamp can be used safely up to maximum of 20.000 lifts with a full load
- Safety coefficient 4
- Ring tested 100% magnaflux
- Made in high resistant steel
- Painted with epoxy paint
- Tested at 20.000 stress cycle
| Part # | WLL metric tons | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | G (in) | H (in) | Weight (lbs) |
| C820X04 | 4 | 0.55 | 2.56 | 1.89 | 1.14 | 5.28 | 0.55 | 2.36 | 3.11 | 1.61 |
| C820X067 | 6.7 | 0.79 | 3.27 | 2.36 | 1.54 | 6.65 | 0.63 | 3.46 | 4.06 | 3.97 |
| C820X10 | 10 | 0.87 | 3.78 | 2.56 | 1.89 | 7.72 | 0.77 | 3.86 | 4.65 | 6.61 |
| C820X16 | 16 | 1.22 | 4.96 | 3.54 | 2.17 | 10.39 | 1.14 | 5 | 6.1 | 12.68 |
| C820X30 | 30 | 1.65 | 6.89 | 5.12 | 3.11 | 14.61 | 1.77 | 6.18 | 8.54 | 35.27 |
